Skip to end of banner
Go to start of banner

Using AWS Command Line Interface for data upload

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

The AWS Command Line Interface (AWS CLI) is an open source tool that enables you to interact with AWS services using commands in your command-line shell. Online information can be found here.

Prior to using the AWS CLI you will need to register with the AusSeabed Data Hub and follow the instructions below.

Step ID

Step Description

User Interface

1

Open Command Prompt or Powershell to initiate commands

2

Type the following commands at the Prompt (C:\...)

C:\WINDOWS\system32>aws configure

3

You will be prompted for your Access Key ID, your secret Access key, a default region and a default output

Note: to view your current configuration type: aws configure list

4

Type aws s3 ls (to display available S3 buckets)

C:\WINDOWS\system32>aws s3 ls

5

If you want to look deeper type

C:\WINDOWS\system32>aws s3 ls ausseabed-public-bathymetry

  • No labels

null
© Commonwealth of Australia (Geoscience Australia) year of publication.

With the exception of the Commonwealth Coat of Arms and where otherwise noted, this product is provided under a Creative Commons Attribution 4.0 International Licence.

http://creativecommons.org/licenses/by/4.0/legalcode